LUBRICATION (J05E)
13–21
(2)
Mount the guide bolts (2 pcs.) to the cylinder block.
(3)
Replace with the new gasket and align the oil pump with the cylin-
der block mounting position.
(4)
Mount the oil pump to the cylinder block with bolts (9 pcs.) in the
order shown in the figure.
Tightening Torque:
28.5 N·m {291 kgf·cm, 21 lbf·ft}
! CAUTION
•
A misaligned gasket may cause defective sealing, which
results in outflow of all engine oil in the oil pump when the
engine is stopped. Defective sealing may also result in an
insufficient engine oil suction quantity in the initial rotation
when the engine is restarted, which leads to seizure or
abnormal wear.
•
Unfasten the guide bolts (2 pcs.) after temporarily tightening
the oil pump mounting bolts (7 pcs.).
•
Note that failure to observe the tightening order may damage
the oil pump.
•
After tightening, make sure that the gear turns easily by
hand.
GUIDE BOLTS
SHTS021271200047
GASKET
GUIDE BOLTS
OIL PUMP
SHTS021271200048
