GENERAL INTRODUCTION
1–10
2.
VEHICLE NOISE EMISSION CONTROL INFORMATION
•
The Vehicle Noise Emission Control Information is affixed to the
left pillar of the cab. The name of manufacturer, production year
and month, and noise emission applicable to medium and heavy
trucks in conformity with U.S. EPA Regulations are displayed.
3.
ENGINE SERIAL NUMBER
(1)
The engine serial number is stamped on the cylinder block, as
shown in the illustration.
A: J05E
4.
TRANSMISSION SERIAL NUMBER
(1)
The transmission serial number is stamped on the transmission,
as shown in the illustration.
A: A465
5.
CLEAN IDLE CERTIFIED LABEL FOR U.S.
•
Make sure that the following clean engine idling certified label is
affixed to the outside of the left door. By the CARB below, the
label must be affixed there to prove that the new vehicle with die-
sel engine manufactured from Jan., 2008 conforms to this low.
FOR ALL MODELS
SHTS01ZZZ0000011
A
SHTS01ZZZ0000012
A
SHTS01ZZZ0000013
SHTS01ZZZ0000014
CARB § 1956.8. Exhaust Emission Standard and Test
Procedure (a) (b) Heavy-Duty Diesel Engine Idling
Requirements
