COOLING (J05E)
12–32
MOUNTING THE COOLANT PUMP
1.
MOUNTING THE COOLANT PUMP
(1)
Use the scraper, remove dirt on the joint surface between the
coolant pump and cylinder block.
(2)
Apply liquid gasket (ThreeBond TB1207B: Black or equivalent) to
the coolant pump as shown in the figure.
! CAUTION
•
Apply the liquid gasket seamlessly.
•
Apply the liquid gasket with a 1.5 mm {0.060 in.} width.
•
Mount the case within 20 minutes after applying the liquid
gasket.
(3)
Align with the cylinder block dowel pin, mount the coolant pump
with bolts (8 pcs.).
Tightening Torque:
28.5 N·m {291 kgf·cm, 21 lbf·ft}
NOTICE
Mount the coolant pump using guide bolts to avoid misalignment
of the liquid gasket.
2.
CONNECTING THE COOLANT PIPE
(1)
Replace with the new gasket and mount the coolant pipe B to the
coolant pump with a union bolt.
3.
MOUNTING THE CRANKSHAFT PULLEY
Reference: ENGINE MECHANICAL (J05E), CRANKSHAFT
PULLEY, REPLACEMENT, MOUNTING THE CRANKSHAFT
PULLEY (Page 10-48)
4.
MOUNTING THERMOSTAT CASE AND THERMOSTAT
Reference: COOLING (J05E), THERMOSTAT CASE AND
THERMOSTAT, OVERHAUL, MOUNTING THERMOSTAT
CASE AND THERMOSTAT (Page 12-27)
5.
ADDING THE COOLANT
Reference: COOLING (J05E), RADIATOR, REPLACEMENT,
MOUNTING THE RADIATOR (Page 12-9)
COOLANT PUMP
SHTS021271100055
COOLANT PUMP
CYLINDER
BLOCK
SHTS021271100056
COOLANT
PUMP
COOLANT
PIPE B
SHTS021271100057
