EXHAUST (J05E)
11–38
5.
REMOVING THE DPR
(1)
Unfasten the 8 bolts and 8 nuts to remove the DPR cleaner and
gasket from the center pipe No.1.
(2)
Set the transmission jack under the DPR cleaner and lash with a
lashing device.
! CAUTION
To hold and stabilize the DPR cleaner, make sure to lash it with a
lashing device before installation or removal.
(3)
Unfasten the 8 bolts and 8 nuts to remove 2 support brackets and
8 washers from the DPR cleaner.
(4)
Pull off the DPR cleaner from the vehicle while supporting it to
prevent falling.
! CAUTION
Pay attention to weight balance.
MOUNTING DPR CLEANER
1.
TEMPORARY MOUNTING OF THE DPR CLEANER
(1)
Set a transmission jack under the DPR cleaner and lash with a
lashing device.
! CAUTION
To hold and stabilize the DPR cleaner, make sure to lash it with a
lashing device before installation or removal.
(2)
Set the DPR cleaner to the mounting position while supporting it
to prevent falling.
(3)
Replace with a new gasket, 8 bolts, and 8 nuts and temporarily
tighten the DPR cleaner to the center pipe No.1.
! CAUTION
To prevent exhaust gas leakage, make sure to replace with a new
gasket, bolts, and nuts.
(4)
Temporarily tighten 2 support brackets and 8 washers to the DPR
cleaner with 8 bolts and 8 nuts.
DPR CLEANER
CENTER PIPE No.1
SHTS021271000049
DPR CLEANER
CENTER PIPE No.1
SUPPORT BRACKET
SHTS021271000050
DPR CLEANER
CENTER PIPE No.1
SHTS021271000051
DPR CLEANER
CENTER PIPE No.1
SUPPORT BRACKET
SHTS021271000052
