HarmonicDrive H A - 800A, Manual

Page: 247 / 314

10-7 Output signal operation
10-24
3
4
5
6
7
8
9
10
11
Appe
C
om
m
uni
cat
ion sof
tw
ar
e
10-7 Output signal operation
The signals corresponding to outputs 1 to 7 can be turned ON/OFF as desired.
1
Click the "Execute" button.
2
Select the signal you want to output.
The selected signal turns ON.
This can be used to check/verify with your host devices.
3
If you click "Execute" button again, the output signal operation is ended and the operated
output signal return to the original status.

This cannot be used at the same time as the [T01: Output signal operation] performed
by operating the driver panel.

Take note that, in this operation, the actual output signals are output and the device
may be activated by the operation. Also, the operation can be done even when
HA-800A is being automatically operated by the command from the host controller.
Please keep this in mind during the actual operation.

This operation cannot be executed at the same time as the output signal operation
from test mode.
2
1, 3