HarmonicDrive H A - 800A, Manual

Page: 224 / 314

10-1 Overview
10-1
1
2
3
4
5
6
7
8
9
10
11
Appe
C
om
m
uni
cat
ion sof
tw
ar
e
10-1 Overview
PSF-800 is a communication software program that lets you change driver parameters and monitor
operation waveforms, etc., from a personal computer.
Operating environment
PSF-800 needs the following environment to operate correctly.
Be sure to use PSF-800 in the following environment to prevent malfunction.
Item Environment
Computer Personal computer running Windows® ME, Windows® NT, Windows® 2000, Windows®
Xp, Windows Vista®*
1
, or Windows® 7*
1
, having a built-in RS-232C communication port or
USB port
OS Windows® ME, Windows® NT, Windows® 2000, Windows® Xp, Windows Vista®*
1
,
Windows® 7*
1
Memory Memory size required by each OS or more
Hard disk Free disk space of 3 MB or more
(Additional free disk space is needed if created data will be saved.)
Display 256 colors or more
Others
・
Microsoft® Mouse, Microsoft® IntelliMouse® or other compatible pointing device
・
Printer operating on the specified OS, if created data will be printed
*1: Successful operation has been verified on Windows Vista®, and Windows 7®, but it is not guaranteed.
*
Microsoft Windows and IntelliMouse are registered trademarks and trademarks of Microsoft
Corporation in the United States for use in the United States, Japan and other countries.
* Microsoft Windows Operating System is the full name of Windows.

Download the latest version of PSF-800 from our web site.
Setup
1
Download PSF-800.
Download the software from our website (http://www.hds.co.jp).
2
Install PSF-800.
Extract the files from the downloaded folder and run SETUP.EXE to set up the software
according to the on-screen instructions.

Using a USB port
If a USB port is used, you need an adapter to convert the USB port to a RS-232C port.
(USB-RSAQ3 IO Data, etc.)
The built-in RS-232C port of the personal computer is normally assigned to COM1. However,
this assignment changes if a USB conversion adapter is used. Perform the following setting
procedure:
(1) Go to "Control Panel", open "System", and display "Device Manger".