Hardy Process Solutions HI 2160RC PLUS, Operation And Installation Manual

Page: 149 / 220

HI 2160RC
PLUS
MANUAL
7-10
XG 103.721 XI 492763 XTD 100705081591 X REL 00 S REM 00 XC
0.060 L/S X BA 2.252 X SS 2.00
SUB-CMD MEANING
I Load cell input command. Used prima-
rily to check the load cell input section of
the unit. The command will return the
number of averaged counts that is cur-
rently being read from the load cell input.
S (Set) Command
COMMAND MEANING
S Set specified SUB-CMD data as follows:
SUB-CMD MEANING
C HHMM Set Clock. HHMM represents
hours and minutes.
MD MMDDYY Set Date. MMDDYY represents
month, day and year.
Error Codes • The codes are decimal codes returned in response to receiving a
command from the Host.
• General Communication Return Codes:
Response Code ‘A':
Acknowledge good data received.
Response Code ‘N': Negative Acknowledge, error code will
follow.
Response #23: Illegal command while in Hold Mode.
Response #24: Negative value not allowed.
Response #25: Invalid interrupt status.
Response #26: Framing error.
Response #27: Parity error.
Response #28: Overrun error.
• Specific Response Error Codes
C. Time/Date 12 “X TD HHMMSSMMDDYY” 33 50
D. Relay Status 2 “X REL xx” 51 59
E. Remote Functions Stat 2 “X REL xx” 60 58
F. Rate of Change Value 3 “X C xxxxxxx nnn” 69 85
G. Batch Amount 4 “X BA xxxxxxxx” 86 99
H. Set Point Value 3 “X SS xxxxxxxx” 100 113
Description Bytes
Var ASCII Bytes
Format (inside quotes)
From To