Hardy Process Solutions HI 2160RC PLUS, Operation And Installation Manual

Page: 141 / 220

HOST PLC
HOST COMPUTER
HI 2160RC
#01
PLUS
HI 2160RC
#02
PLUS
HI 2160RC
#032
PLUS
HI 2151/30
#031
HI 2160RC
PLUS
MANUAL
7-2
FIG. 7-1 MULTIDROP CONFIGURATION WITH HOST AND
CONTROLLERS
NOTE: The 2100 Series batch, rate and weight controllers are intelligent front ends to a dis-
tributed system, therefore, network speed is normally is not critical.
Serial Commands • Serial commands are transmitted to the instrument in ASCII format.
Each command has a single letter corresponding to the command.
• The instrument accepts command strings up to 40 characters (the
40th character will internally default to a carriage return).
Serial Command
Lists 1. Set Commands (S)
COMMAND
SUB-
CMD
DATA
FORMAT
DESCRIPTION OF COMMAND
S AH XXXXXX Set Auto Refill HI Shutoff (up to 6 digits; include decimal point if used).
S AI Y OR N Set Initial Fill (Y for ON; N for OFF).
S AL XXXXXX Set Auto Refill LO Shutoff (up to 6 digits; include decimal point if used.)
S AP XXXXXX Set Auto Refill Stop Level (up to 6 digits; include decimal point if used.)
S AR XXXXXX Set Auto Refill Start Level (up to 6 digits; include decimal point if used.)
TABLE 7-1: S (SET) COMMANDS LISTED ALPHABETICALLY WITHIN SUB-COMMAND