Hardy Process Solutions HI 2160RC PLUS, Operation And Installation Manual

Page: 157 / 220

HI 2160RC
PLUS
MANUAL
8-6
Step 4. Press the down arrow
↓
until it is to the left of the Amount
sub-menu.
• If "Continuous" is displayed, press the Select button. A
value appears.
• When a value displays in the amount sub-menu, you are in
the Batch Mode of Operation.
• If a value is displayed, you are already in the Batch mode.
Step 5. Press the Enter button to accept the value.
Step 6. Press the Exit button to return to the Operating Display.
Step 7. To select a display, press on the display button until you reach
the desired display.
Step 8. There are three Batch Rate Displays:
• Batch Amount and Rate Display. (See Fig. 8-8)
S e t R a t e 1 . 5 2 0 L / M
O P 6 5 . 3 % A c t 1 . 5 2 1
A m o u n t R e q . 1 2 0 . 5 0
O N A c t 1 1 8 . 3 L B
FIG. 8-8 BATCH AMOUNT AND RATE DISPLAY
• The Batch Amount Display shows the amount of
ingredient requested (the set point amount) and the
actual amount delivered since the start of the
batch.
• Our example display shows 120.50 pounds
requested. 118.3 pounds actually delivered.
• The Rate is also displayed.
• Batch Amount Current Weight Display. (See Fig. 8-9)