Hardy Process Solutions HI 2160RC PLUS, Operation And Installation Manual

Page: 214 / 220

HI 2160RC
PLUS
MANUAL
WKSHT 1
SYSTEM DATA WORKSHEETS
To:
Hardy Process Solutions
From: __________________________
ATTN: Hardy Service Center Company __________________________
Email:
Date: _____________________________
When the HI 2160RC
PLUS
is processing to your specifications, record all parameters on the following pages.
Retain a copy and store in a convenient location that is safe and secure. Documenting the performance parame-
ters creates a hard copy backup. The hard copy is very convenient in the event that replacement of the
controller with a spare is necessary or when you require assistance by our local representative or
Hardy Process
Solutions
Customer Support Department.
Date of Installation: ____________ Model #_________________ S/N __________________
SELF-TEST PROGRAM RESULTS
(Perform Self Test by Press the Test Button)
Parameter Example 1 2 3
Firmware 0650-0045
Revision B
CheckSum OB OB PASS
Zero Count 36780
Span Count 992000
Span Weight 10.00
Current Count 484688
Count/Grad 95.52
Time 00:00:15
Date 00-00-00
REAR SW 00000000
INT. SW. 00000000
REMOTE 00000000
RELAYS 00000000
WAVERSAVER
® 4
Scale Make/Model No: __________________________ mV/V Rating: _______________