MAN3186 - TITANUS MICRO
•
SENS®
115
1
2
3
Risk of short circuit due to cabling error
Damage to device possible. Perform all connection work with the device
disconnected from the mains.
NOTE
6.4 Establishing the electrical connection
The following steps must be initially performed to prepare the electrical
connections:
Image 70:
Screw terminals in the device base
1
Aspiration pipe connection
2
Device base
3
Terminal block
► Break through the necessary number of cable glands on the device
base, e.g. with a screwdriver.
► Insert the M20 or M25 cable entries (device base accessories kit) into
the corresponding cable glands.
► Guide the cables through the corresponding cable entries.
► Perform wiring according to the following circuit diagram. The electrical
connection is carried out via the screw terminals of the device base 1a
to 8a and 1b to 8b. Observe the permissible cable diameters of the
Summary of Contents for Ampac TITANUS MICRO-SENS
Page 229: ......
