MAN3186 - TITANUS MICRO
•
SENS®
139
Pipe clips
The change in length can be calculated with the following formula:
Δ
L
Length alteration in [mm]
L
Length of the pipe to be calculated in [m]
Δ
T
Maximum temperature difference in [°C]
δ
Coefficient of length alteration in mm/m°C
δUPVC = 0.08 mm/m°C
δABS = 0.101 mm/m°C
For example, a temperature change of 10 °C on an ABS pipe with a length
of 10 m causes a length change of 10.1 mm.
Image 93:
Pipe clip type NG 23
For the first clip in the pipe system after the pipe connection on the
TITANUS MICRO·SENS®, use a type that does not allow length extension.
Type NG23 plastic pipe clips are used as standard to install the pipe system
(ø 25 mm).
Image 94:
Pipe clip type CLIC-PA
1
First engaging
3
Second engaging
1
2
Summary of Contents for Ampac TITANUS MICRO-SENS
Page 229: ......
