MAN3186 - TITANUS MICRO
•
SENS®
211
Opening the filter after the expiry of the adjusted delay time can lead to an
air flow fault.
TIP
8.7 Replacing the filter elements of air filter
type LF-AD-x
Image 142:
Replacing the air filter elements
► Unfasten the four cover screws by using a screwdriver.
► Remove the housing cover.
► Remove the filter elements.
► Visually check the filter elements for dirt and replace them if necessary.
The filter elements can be cleaned if the dirt level is low.
► Carefully clean off any dust deposits from the inside of the housing.
► Insert the cleaned or new filter elements. Make sure that the air filter
elements are inserted in the correct order as indicated on the
information plate at the bottom of the housing.
► Put the housing cover back on.
► Tighten the four cover screws by using a screwdriver.
Summary of Contents for Ampac TITANUS MICRO-SENS
Page 229: ......
