MAN3186 - TITANUS MICRO
•
SENS®
128
The network should only be set up in consultation with the customer's
system administrator(s). Only use a shielded Ethernet cable CAT5 or
higher.
TIP
Danger of device damage due to electrostatic discharge
Only perform the following work with the device disconnected from the
mains. Do not touch the components of the network module without an anti-
static set. The button for deactivating the memory card is an exception.
NOTE
All network modules are allocated the same IP address by the
manufacturer. Ensure that the standard IP address (192.168.1.5) has not
been allocated in the network as this can otherwise cause network
interference. The IP address can only be changed using the software
"TITANUS® LanXpress".
TIP
You will find more information in the technical manual "TITANUS
networking".
LITERATURE
6.8 Inserting and connecting network module
The network module connects the network to the TITANUS MICRO·SENS®.
An additional housing is required to install the network module. It must be
installed right next to the TITANUS MICRO·SENS®.
Summary of Contents for Ampac TITANUS MICRO-SENS
Page 229: ......
