MAN3186 - TITANUS MICRO
•
SENS®
116
Alarm relay
Fault relay
Reset +
Indicator bus
Reset -
cable glands of the components to be connected and the permissible
wire diameters of the terminals in the device base for 0.5 - 2.5 mm²
wires.
Image 71:
Assigning the screw terminals in the device base
Alarm and fault contacts can be used e.g. for connection to an FDCP or for
controlling signalling devices, control systems, etc. It is also possible to
connect a remote display or response indicators to the indicator bus of the
device.
Permanently energising the reset input results in all messages being
automatically reset when the cause of the message has been eliminated. A
maximum of two relay modules, one remote display, one network module or
five response indicators per TITANUS MICRO·SENS® can be connected.
Summary of Contents for Ampac TITANUS MICRO-SENS
Page 229: ......