![background image](http://html1.mh-extra.com/html/gima/35134/35134_operators-manual_2228002273.webp)
85
ENGLISH
17.9 Other Technical Specifications
1. Power supply: AC100V-240V, 50/60Hz, 60VA; Internal power supply (Lithium battery): DC 14.8V
2. Mode of operation: Continuous
3. Applied Part: ECG lead wire, SpO
2
sensor, TEMP sensor and Cuff
4. Display mode: TFT color LCD
5. Alarming mode: audible & visible alarm
6. Communication: Net port
17.10 Classification
Safety standard:
IEC 60601-1
The type of protection against electric shock
Class I and Internally powered equipment
The degree of protection against electric shock
Defibrillation-proof BF and Defibrillation-proof CF applied parts
Electro-Magnetic Compatibility
Group I, Class A
The protection against harmful ingress of liquid
or particulate matter
IPX2
The device is not intended for use in an oxygen rich environment.
The surface of the device can be cleaned and disinfected with 75% Ethanol, no need to sterilize.
17.11 Operating Environment
1. Ambient temperature range: 5°C~40°C
Relative humidity: 15%~85%, non-condensing
Atmospheric pressure: 70kPa ~106.0kPa
Power Voltage: (100-240) VAC
Power frequency: 50Hz/60Hz
2. This equipment should be situated in a place protected against direct sunlight, so as to prevent overheating inside the
equipment.
3. The device should be stored and used within specified temperature, humidity and atmospheric pressure range, or it
may cause damage to the device or inaccurate measurement result.
4. If the device gets wet by accident, the operator should NOT power it on directly until it has been air-dry enough to
avoid any damage to it.
5. Do not use this equipment in an environment with toxic or inflammable gas.
6. This equipment should be placed on a stand or flat platforms, so as to prevent possible shock.
7. Do not use this equipment in combination with any equipment other than those expressly permitted in the manual.
8. The monitor is defibrillator discharge proof and can be used with electrosurgical unit. But when the device is used
together with defibrillator or electrosurgical equipment, the user (doctor or nurse) should keep the patient under close
surveillance for his/her safety. Refer to the following function description for specific protective measures or notes.
9. Make sure that the equipotential grounding terminal is grounded correctly.
10. Do not use mobile phone nearby, so as to avoid strong radiant field interference.