74
ENGLISH
On this screen, the first channel waveform is ECG waveform of Lead II; the second one is ECG waveform of Lead III; the
third one is ECG waveform of Lead I; the fourth one is SpO
2
waveform; the last channel is respiration waveform. On the
right of waveform area, from the top down, respectively is heart rate, temperature, SpO
2
, RR trend graph, the abscissa of
trend graph (-2h-0) means various trend of every parameter value from now on to two hours before, waveform in trend
graph shifts from right to left.
Operation Instructions:
ECG lead:
press it to shift the ECG monitoring circulatory among I, II, III, aVR, aVL, aVF and V.
Alarm silence:
press to enable or disable the alarm silence function.
Freeze:
press it to freeze ECG waveform or the waveforms of ECG, SpO2 and RESP according to the system
setting. Double press this key within 2 seconds to lock or unlock the operation of all other buttons
(except power switch) on the front panel.
NIBP:
press it to start or stop NIBP measure.
DISP:
press it to shift the display to the Main Screen.
Navigation Knob
: no action.
Note
:
when “3” lead wires are chosen in “Cable” setting of ECG Setup, then the display view of 2 hours trends
screen will not be available.
12.5 Parameter Screen
Press the DISP key to shift screen to Parameter Screen when setting Disp2 as “Parameter” in System Setup screen, as
shown in Figure12.5
Figure 12.5A Parameter screen
