X400CE 3D Printer Manual
Seite:
70/245
Stand:
2015/08/28 11:55
© German RepRap GmbH
70/245
X-axis carriage parts overview
Number Description
1
X-axis carriage, pre-assembled
1
Carriage Mount
1
Carriage Cable Mount
1
Carriage Fanmount (optional)
2
M4x120 cylinder head screw
4
M4 washer
2
M4 self-locking nut
2
M3 self-locking nut
Additional parts for the Dual-Extruder
Number Description
1
Carriage Mount
2
M4x120 cylinder head screw
4
M4 washer
2
M4 self-locking nut
2
M3 self-locking nut
The additional parts for the Dual-Extruder are marked with a blue rectangle
To unloose the “Carriage Clamp Belt” later in an easy way, two nuts are placed in the hexagon holes
of each “Carriage Mount”.
The locking part of the nut must be on the outside.
Carriage Mount
The “carriage mount” is placed between the two “Carriage Clamps LM12UU” on the shaft. In addition,
the carriage cable mount is added on top and the carriage fan - if you chose this option - is mount on
the bottom. The screw heads have to be on the bottom side to prevent collision with the printing bed.
The “carriage fan mount” helps to mount a fan which cools down the printed part. A fan is not
included in the construction kit. This is an optional function.
If the X400 needs to be fitted with the optional dual extruder, the additional carriage mount is
