X400CE 3D Printer Manual
Seite:
163/245
Stand:
2015/08/28 11:55
© German RepRap GmbH
163/245
Number Description
1
LCD/MSD PCB panel
1
1×18 Jack/connector
1
2×4 Jack/connector
There are two versions of the GRR RAMPS board, one with a male connector in AUX-4, the other with a
female header. The adaptor board for the LCD/MSD has to be soldered accordingly to match the
RAMPS board in your kit.
If there is a male (pin) header in AUX-4 on the RAMPS, solder the female connector to the bottom of
the adaptor board. If your RAMPS board has instead a socket in AUX-4, solder the pin header to the
bottom of the adaptor board.
RAMPS with male (pin) header
RAMPS with female header
If you are unsure what to do, please contact our
Support
before soldering either of them on.
