X400CE 3D Printer Manual
Seite:
183/245
Stand:
2015/08/28 11:55
© German RepRap GmbH
183/245
Assembly printer feet components overview
Number Description
4
rubber feet
After the wiring the rubber feet can be screwed through the base plate into the frame.
Finish assembly printer feet
Grounding of the housing
Number Description
1
Ground cable
1
M6x16 cylinder head screw
1
M6 toothed washer
1
M6 T slot nut
Grounding of the housing parts overview
It is very important to properly ground all conductive components of the X400!
In this step the 4 protective earth cables are fastened to the profile: * from the fan in the electronics
box * from the heated bed (if fitted) * from the control circuit of the heated bed (if fitted) * the ground
cable that's not connected to anything else yet
