X400CE 3D Printer Manual
Seite:
136/245
Stand:
2015/08/28 11:55
© German RepRap GmbH
136/245
Base plate
Base plate parts overview
Number Description
1
Elektronic box, pre-assembled
1
Base plate
4
M3x25 cylinder head screw
4
sleeve, 6mm
8
M3 washer
4
M3 self-locking nut
Remove and discard the protective foil from the base plate. Then bolt the electronics box to the base
plate including the distance sleeves under the box. From now on, place some pieces of styrofoam,
wood, paper, bubble wrap or some rags under the base plate to prevent the heads of the screws from
scratching the table and avoid any sagging of the base plate.
The electronic box is bolted on as shown in the image “Finish”.
Finish base plate
ATX socket
