X400CE 3D Printer Manual
Seite:
170/245
Stand:
2015/08/28 11:55
© German RepRap GmbH
170/245
Component list spacer profiles
Number Description
4
Spacer profile]]
4
threaded rod, 20mm
Bolt the remaining 4 spacer profiles to the upper corners of the frame.
Finished spacer profiles
Cable loom extruder
Invalid Link
Component list thermistor connection
Number Description
2
shrink tubing big
2
shrink tubing small
Remove end insulation and tin the thermistor cables (TH-0 for one extruder, TH-0 and and TH-2 on a
dual extruder system). Slip on the big shrink tubing and solder the cables to the thermistor cables.
Slide the shrink tubing over the soldered area and the silicon tubing and shrink it.
