X400CE 3D Printer Manual
Seite:
153/245
Stand:
2015/08/28 11:55
© German RepRap GmbH
153/245
Erdungskabel
Next insert the cable loom through the energy chain and clip it onto the end link 1. Fasten end link 2
to the blue base plate.
Befestigung Energiekette Druckbett an blauer
Zwischenplatte
Now clip the the energy chain to this end link. Then thread the cables from the energy chain through
the hole in the blue base plate. Slide the shrink tubing on the cable loom and place it where the loom
runs through the blue base plate. Shrink it in place using a heat gun. Next crimp or solder the M6 ring
terminal to the free end of the protective earth cable.
