X400CE 3D Printer Manual
Seite:
101/245
Stand:
2015/08/28 11:55
© German RepRap GmbH
101/245
Number Description
1
M3 grub screw
Slide the filament screw onto the stepper motor axis and secure it with the grub screw. Ensure that
the hobbed area lines up with the idler pulley as shown in the photo.
Finish filament screw
Construction of the extruder base
Construction of the extruder base plate parts
overview
Number Description
1
Extruder base plate fan
1
Extruder base plate stepper motor
1
PEEK thermal barrier
1
M3 self-locking nut
The PEEK thermal barrier are held in place by the two parts of the barrier holder. Make sure the thin
white flange on one of the parts faces the same way as the threaded side of the barrier. Press the
locking nut into the groove of the holder as shown.
