X400CE 3D Printer Manual
Seite:
103/245
Stand:
2015/08/28 11:55
© German RepRap GmbH
103/245
Extruder fan parts overview
Number Description
1
Extruder-fan
1
sleeve, 5mm
1
M3x40 cylinder head screw
1
M3x25 cylinder head screw
2
M3 washer
Add a washer to the long cylinder head screw and insert it into the fan mounting holes. Make sure the
thread is on the same side as the decal; that way the fan blows air across the filament.
Add another washer to the screw on the opposite side of the fan and secure it to the extruder base
plate.
Use the shorter screw for the other hole of the base plate.
Finish Extruder fan (Single-Extruder)
If you want to use two extruders the fans can be mounted in opposite ways.
Finish Extruder fan (Dual-Extruder)
