X400CE 3D Printer Manual
Seite:
149/245
Stand:
2015/08/28 11:55
© German RepRap GmbH
149/245
Finish Insulation
Assembly of the heated bed (heated bed)
This section only needs to be performed when the X400 is assembled with a heated bed!
Assembly of the heated bed parts overview
Number Description
4
Spring
4
M6x40 Round head screw
8
M6 washer, plastic
4
M6 washer
4
M6 self-locking nut
1
Heated bed, pre-assembled
4
M6 washer, large OD
The round head screws are plugged with a plastic washer from above through the ceramic plate and
then they are assembled with another plastic washer, a spring and the M6 washer (large OD).
Afterwards, they are plugged through the steel plate. On the bottom, this is countered with a washer
and a nut.
