X400CE 3D Printer Manual
Seite:
229/245
Stand:
2015/08/28 11:55
© German RepRap GmbH
229/245
The printer cannot be connected to the host
PC
In case the connection with the printer via Repetier-Host fails, it has to be checked whether a different
program uses the port “COMx” for the communication with the printer, e.g. the Arduino software. Quit
the other software if necessary. After that, or if no other program uses the port “COMx”, the reset
button has to be pressed to restart the printer. Unplugging and replugging the USB cable has the
same effect. Now the printer should be available.
