X400CE 3D Printer Manual
Seite:
65/245
Stand:
2015/08/28 11:55
© German RepRap GmbH
65/245
Number Description
1
M3x50 cylinder head screw
2
M3 washer
1
M3 locking nut
1
sleeve, 5mm
The optical end stops allow to define a reference position for the moving parts.
Attach the end stop to the X-glider using the long screw. Then install the X-glider clamp belt on the
side where the motor is located, making sure that the tooted belt fits between the belt clamp and the
LM12UU bearing.
Next attach the opto end stop on the other side using the 5mm sleeve.
Don't tighten the screw just yet as the bearings still need to be inserted.
Finish Opto-Endstop X
Opto flag Y
Opto-Flag Y parts overview
Number Description
1
X-glider, cylinder fitting screw
1
X-glider clamp LM12UU
1
X-glider belt clamp
