X400CE 3D Printer Manual
Seite:
222/245
Stand:
2015/08/28 11:55
© German RepRap GmbH
222/245
common RepRap printer operating programs.
Repetier-Host
The Repetier-Host is the central point to operate the printer. The item “Load” (Image “Repetier-Host
loading and printing”) is selected to load a .gcode file. Afterwards, the object is displayed in the
virtual printing room.
Repetier-Host loading and printing
5)
After the object has been checked regarding position, size and possible bugs in the object, the print
job may be started using “Start job” (image “Repetier-Host loading and printing”).
By the end of the process, the completed part should lie on the printing bed (image “LOVE printed”)
and when cooled down, it can simply be removed or pried from the bed.
