X400CE 3D Printer Manual
Seite:
130/245
Stand:
2015/08/28 11:55
© German RepRap GmbH
130/245
Energiekette Y-Achse Detail
Next insert the cable loom as follows: lay down the energy chain with the opening facing up (the end
without the dove tail link facing to the left). Insert the end of the loom with the black cover into the
energy chain so that the end with the two motor connectors and the end stop is on the left and the
long tail with the connectors for the electronics box on the right.
Details energy chain Y-axis
Attach the last chain link to the small hole in the guiding strip. Make sure the energy chain is long
enough even at the far end of the Y-axis yet doesn't hit the guiding rod. Fasten the other end of the
chain to the tin strip holder on the carriage.
Finish energy chain Y-axis
Electronics fan grill
