GE Optima XR646 Operator'S Manual Download

Page: 401 / 463

Chapter 15: Preferences

5495975-1EN Rev.9

15-26

Figure 15-24

Auto Delete

Table 15-9

Auto Delete functions

Function

Description

Auto Delete
[ON] [OFF]

Turns Auto Delete on or off.

Auto Delete images when
database is __% full.

Specifies when to auto delete images based on database size.

Delete images until
database is __% full.

Specifies how many images to delete based on database size.

Images must be at least __
Days old before deletion.

Specifies how old (in days) an image must be for it to be deleted. Images
that are less than the entered number will not be deleted.

Images must meet __ of
the checked options before
deletion.

Allows you to constrain the deletion of raw and processed images based
upon checkbox selection (see below).
Available options are:



All



Any



None

Processed image printed

Selecting the Print parameter allows auto deletion of images that have
been printed.

Processed image sent

Allows auto deletion of processed images with no errors that have been
sent to another viewing station.

Summary of Contents for Optima XR646
































































































































































































































































































































































































































































Search results

Summary of Contents for Optima XR646

Reviews:

Related manuals for Optima XR646

Brands by name

Popular brands

GE Optima XR646, Operator'S Manual

Search results

Summary of Contents for Optima XR646

Reviews:

Related manuals for Optima XR646

Brands by name

Popular brands