Appendix A: Login Administration
5495975-1EN Rev.9
A-14
© 2013-2017 General Electric Company. All rights reserved.
Change Group’s Roles
Once a group is highlighted, check or uncheck the checkboxes for the Roles you want to give to this
group, and press [Apply Roles]. There is a green label confirmation as usual for successfully applied roles.
If there is a failure on the back-end (i.e. a problem writing the roles configuration changes), you will
receive an error message box with information.
Add Memberships
1. Once a group is highlighted, press [Add Membership].
This brings up a popup panel that lists all of the users that are eligible to be added to this group. If
there are no users eligible to be added to this group, you will get an error message box instead of the
popup panel. Once you get the popup panel, simply select all of the users that you want to add to this
group (you can select as many as you want at one time).
2. Press [Add Membership].
If you do not want to remove the group, simply press [Cancel].
Remove Memberships
1. Once a group is highlighted, press [Remove Membership].
This brings up a popup panel that lists all of the users that are eligible to be removed from this group.
If there are no users eligible to be removed from this group, you will get an error message box instead
of the popup panel. Once you get the popup panel, simply select all of the users that you want to
remove from this group (you can select as many as you want at one time).
2. Press [Remove Membership].
If you do not want to remove the group, simply press [Cancel].
Configure Enterprise Tab
The last tab on the EA3 Administration Component is the Enterprise tab. On this tab, you can configure
the properties necessary to make a connection to an Enterprise directory server (i.e. MSAD, Novell, etc.).
The Enterprise Tab is used by the site’s IT (Information Technology) or GE Service personnel. It provides
connectivity to the site’s user database. If you do not have a network established in your hospital or
clinic, this tab will not be used.
Things to consider:
Utilize the enterprise capability whenever possible.
Make sure the enterprise groups are granular enough to restrict protocol edit access.
The inactivity timeout should be turned on.
1. Press [Enterprise]
