Chapter 5: Quick Steps
5495975-1EN Rev.9
5-1
© 2013-2017 General Electric Company. All rights reserved.
Chapter 5: Quick Steps
This section provides an overview of common tasks. Refer to the relevant chapters for detailed informa-
tion.
Hardware
This following lists the basic processes for working with the system hardware. Refer to
for more information.
Emergency Stop button
1. In an emergency situation, press the Emergency Stop button in with force.
2. Resolve the emergency situation.
3. When normal conditions are confirmed, turn (RCIM) or pull (table) the e-stop button to reset.
The system will power up automatically.
CAUTION
For Digital Table, when the Emergency Stop button has been activated, the table
will move longitudinally only. The table is not locked into position. Exercise
extreme caution with your patient when this happens.
Raise and Lower the Digital Table
1. Release the table lock, if necessary.
2. To raise the table, press the Up pedal two consecutive times (“double-tap”). This activates the foot
pedal.
3. Hold the foot pedal down until the desired height is reached.
4. Remove your foot from the pedal to stop the movement.
5. To lower the table, press the Down pedal two consecutive times (“double-tap”).
6. Hold the foot pedal down until the desired height is reached.
7. Remove your foot from the pedal to stop the movement.
