GE 001C 051D 003A, Service Manual

Page: 81 / 282

Configuration: Procedures
2000966-542D Dash 3000/4000/5000 4-9
Procedures
Listed below are the patient monitor settings that can be configured.
Each procedure is described on the next pages.
From the Main Menu

“Set print locations” on page 4-10
From Service Mode

“Set Unit Name” on page 4-11

“Set Bed Number” on page 4-11

“Patient-Monitor Type” on page 4-12

“Admit Menu” on page 4-13

“Confirm or configure wireless LAN” on page 4-14
From Boot Code

“Set Defib Sync Voltage and pulse width” on page 4-18

“Set Line Frequency” on page 4-18

“Set CIC and QS protocol” on page 4-19

“Set MUSE system protocol” on page 4-19

“Transcutaneous Pace Blank Length” on page 4-19

“Set Country Selection” on page 4-20

“Set Language” on page 4-20

“Enable or disable AFIB Identification” on page 4-21

“Enable or disable IntelliRate” on page 4-21

“Analog Out Buzz” on page 4-22
Also see “Advanced user procedures” on page 4-23 to

“Set time and date” on page 4-23

“Transfer monitor defaults” on page 4-24
After completing all necessary procedures, go to “Functional and
electrical safety checks” on page 8-1.