GCC Technologies RX Series User Manual Download

Page: 68 / 178

RX Series User Manual

Operation

4-12

instruct the print driver to process the inside vector image and moving outwards. This setting

will always automatically direct the cutter to cut from the inner most vector shape and move

outwards.

Cutting Path Optimization:

This is a setting that will minimize your process time. When selected, the print driver will

analyze your image and automatically determine the most efficient processing path to process

your image.

File Function (Option Page):

The file function section allows you to manage various cutter parameters. This section is useful

when performing repeated jobs on a variety of objects, allowing you to save your frequently

used cutter parameters and load them in the future.

• Custom Media: This section lists the files for the parameter settings that you have recently

created and worked. You can save more than 50 files to simplify your cutting job.

• Default: This section contains the reference settings that are applicable with the verified

materials to achieve the best cutting results. Please note that the setting value might need to

be adjusted according to different suppliers of materials.

• SAVE: This function will save current print driver parameter settings to a file under the

specified location on your computer. (Saved parameter setting files will be tagged with the RX

series extension)

• LOAD: This function allows you to load previously saved print driver parameters.

• ORIGINAL: This function will load the print driver’s original factory parameter settings.

• SAVE TO DEFAULT: This function allows you to save your current print driver parameters as

the default startup settings.

• DELETE: This function will delete the file you select from the Custom Media section, whileas

the settings in Default section cannot be deleted. Please note the delete function only

removes the file from the Custom Media section, it does not remove the .RX file from your

hard drive, if you wish to completely remove the file from your hard disk, and you will have to

manually delete the file from your operating system.

Summary of Contents for RX Series



















































































































































































Search results

Summary of Contents for RX Series

Reviews:

Related manuals for RX Series

Brands by name

Popular brands

GCC Technologies RX Series, User Manual

Search results

Summary of Contents for RX Series

Reviews:

Related manuals for RX Series

Brands by name

Popular brands