applynetwork(8)
System Administration
21
NAME
applynetwork - apply XSCF network information to the XSCF
SYNOPSIS
applynetwork
[ [
-q
]
-{y|n}
] [
-M
]
applynetwork
-h
DESCRIPTION
applynetwork
(8) command applies XSCF network information that has been set
to the XSCF.
Setting network information on XSCF is a three-step process:
1. Set the information with the following commands:
■
sethostname
(8) - Set XSCF host name and a DNS domain name
■
setnameserver
(8) - Set a DNS server name and a DNS search path
■
setnetwork
(8) - Set IP address and netmask of XSCF network interface
■
setroute
(8) - Set routing information of XSCF network interface
2. Execute the
applynetwork
(8) command to apply the settings to XSCF.
3. Execute the
rebootxscf
(8) command to make the changes to the XSCF
permanent.
Note –
If XSCF is reset without executing the
applynetwork
(8) command,
network information that is set is not applied in XSCF. Also, information that is set
is deleted.
Privileges
You must have
platadm
privileges to run this command.
Refer to
setprivileges
(8) for more information.
OPTIONS
The following options are supported:
EXTENDED
DESCRIPTION
■
When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "
y
" to execute the command or "
n
"
to cancel the command.
■
Use the appropriate network commands to specify the following settings, then
execute the
applynetwork
(8) command. All these settings must be present and
proper or the XSCF network settings will not be applied.
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-M
Displays text by page.
-n
Automatically answers "
n
" (no) to all prompts.
-q
Suppresses all messages to stdout, including prompts.
-y
Automatically answers "
y
" (yes) to all prompts.
Summary of Contents for SPARC Enterprise M3000
