Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 318 / 560

setssh(8)
294 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
OPTIONS
The following options are supported:
EXTENDED
DESCRIPTION
■
When a host public key is created, a prompt to confirm execution of the
command with the specified options is displayed. Enter "
y
" to execute the
command or "
n
" to cancel the command.
■
When a host public key already exists, if you generate a host public key, a
prompt to confirm the update is displayed. Enter "
y
" to update or "
n
" to cancel
the command.
-a
Deletes all registered user public keys. Should be specified
with "
-c delpubkey
."
-c addpubkey
Registers the user public key.
-c delpubkey
Deletes the user public key.
-c
{
enable
|
disable
} Specifies whether to enable the SSH service. One of the
following values can be specified:
enable
Starts the SSH service.
disable
Stops the SSH service.
-c genhostkey
Generates a host public key for SSH2.
-h
Displays usage statement. When used with other options
or operands, an error occurs.
-m dscp
= mode Specifies whether or not to permit access from domain to
the SSH service via DSCP. One of the following values can
be specified. It is set to
accept
by default.
accept
Permits access to the SSH service.
deny
Restricts access to the SSH service.
-n
Automatically answers "
n
" (no) to all prompts.
-q
Suppresses all messages to stdout, including prompts.
-s
line Specifies the user public key number to delete. For line,
specify the number which displayed after the
showssh -c
pubkey
command executed. Should be specified with "
-c
delpubkey
."
-u
user_name Specifies the user account name to register or delete the
user public key. Should be specified with "
-c addpubkey
"
or "
-c delpubkey
." When the
-u
option omitted, the user
public key of the current login user account becomes the
target.
-y
Automatically answers "
y
" (yes) to all prompts.