Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 25 / 560

Intro(8)
Intro 1
NAME
Intro - list the commands provided by the XSCF firmware
DESCRIPTION
Intro
(8) command lists the commands provided by the XSCF firmware of the
SPARC Enterprise M3000/M4000/M5000/M8000/M9000 servers.
Some commands are used in a different way or not supported on your server. For
details, refer to the pages of each command.
LIST OF
COMMANDS
In XSCF, the following commands are provided:
Intro
,
intro
list the commands provided by the XSCF firmware
addboard
configure an eXtended System Board(XSB) into the domain
configuration or assigns it to the domain configuration
addcodactivation
add a Capacity on Demand (COD) activation key to the
COD Hardware Activation database
addcodlicense
add a Capacity on Demand (COD) right-to-use (RTU)
license key to the COD license database
addfru
add a Field Replaceable Unit (FRU)
adduser
create an XSCF user account
applynetwork
apply XSCF network information to the XSCF
cfgdevice
connect a CD-RW/DVD-RW and TAPE drive unit to the
port, disconnect it from the port, or display the status of the
drive
clockboard
set or display the clock control unit used at system startup
console
connect to a domain console
deleteboard
disconnect an eXtended System Board (XSB) from the
domain configuration
deletecodactivatio
n
remove a Capacity on Demand (COD) activation key from
the COD Hardware Activation database
deletecodlicense
remove a Capacity on Demand (COD) right-to-use (RTU)
license key from the COD license database
deletefru
delete a Field Replaceable Unit (FRU)
deleteuser
delete an XSCF user account
disableuser
disable an XSCF user account
dumpconfig
save system configuration information to a file
enableuser
enable an XSCF user account