Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 369 / 560

showcodlicense(8)
System Administration 345
NAME
showcodlicense - display the current Capacity on Demand (COD) right-to-use
(RTU) licenses stored in the COD license database
SYNOPSIS showcodlicense [
-r
] [
-v
]
showcodlicense
-h
DESCRIPTION
showcodlicense
(8) displays COD license information stored in the COD license
database.
The
showcodlicense
(8) command is not available on the M3000 server.
When used without options it displays the current licenses.
Privileges
You must have
platadm
or
platop
privileges to run this command.
Refer to
setprivileges
(8) for more information.
OPTIONS The following options are supported:
EXTENDED
DESCRIPTION
The
showcodlicense
command displays the following COD information:
-h
Displays usage statement.
When used with other options or operands, an error occurs.
-r
Displays the license information in the raw license-signature format,
as stored in the COD license database.
-v
Specifies verbose output. Displays both the formatted license
information and raw
license-signature data.
Description
Type of resource (processor).
Ver
Version number of the license, which is always set to
01
.
Expiration
Expiration of the license.
Count
Number of right-to-use licenses granted for the given resource.
Status GOOD
, which indicates that the given resource is valid, or
EXPIRED
, which indicates that the resource license is no longer
valid.