Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 62 / 560

console(8)
38 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
EXTENDED
DESCRIPTION
■
When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.
■
The domain console regards "#" used at the beginning of a line as an escape
character. An escape character is specified to instruct the console to perform
special processing. Examples of processing that can be specified in combination
with "#" are as follows.
■
To enter "
#
" at the beginning of a line, enter "
#
" twice.
■
To display information on the currently connected domain console, use the
showconsolepath
(8) command.
EXIT STATUS The following exit values are returned:
SEE ALSO sendbreak
(8)
, showconsolepath
(8)
-r
Sets up a connection to a read-only console.
-s
escapeChar Specifies an escape character. The default is "
#
" . The character
specified for escapeChar must be enclosed in "
" "
" (double
quotation). The following symbols can be specified for escapeChar :
"
#
", "
@
", "
^
", "
&
", "
?
", "
*
", "
=
", "
.
", "
|
"
Specified escape character is available only in the session that
executed the
console
(8) command.
-y
Automatically answers "
y
" (yes) to all prompts.
"#" and "?" Outputs a status message.
"#" and "." (period) Disconnects the console.
0
Successful completion.
>0
An error occurred.