manualshive.com logo in svg

Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 88 / 560

Share
Download
Fujitsu SPARC Enterprise M3000 Xscf Reference Manual Download Page 88

flashupdate(8)

64

SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

EXTENDED

DESCRIPTION

■

When the command is executed, a prompt to confirm execution of the command 
with the specified options is displayed.  Enter "

y

" to execute the command or "

n

" 

to cancel the command.

■

When the firmware is updated, the XSCF unit is reset.  Therefore, LAN 
connection to the XSCF is canceled if already established.

■

When there's a faulty Field Replaceable Unit (FRU), can't update the firmware. 
Resolve the FRU fault then update.

EXAMPLES

EXAMPLE 1

Check whether the entire firmware can be updated to version 1082.

EXAMPLE 2

Updates the entire firmware to version from 1080 to 1082.

-q

Suppresses all messages to stdout, including prompts. 

-s

 

version

Specifies an XCP comprehensive firmware version.  For

 version

, 

specify a major version, minor version and micro version 
continuously.

The XCP version number appears as xyyz by four digits, where:

x

Major firmware release number

yy

Minor release number

z

Micro release number

-y

Automatically answers "

y

" (yes) to all prompts.

XSCF> 

flashupdate -c check -m xcp -s 1082

 

XSCF> 

flashupdate -c update -m xcp -s 1082

 

The XSCF will be reset. Continue? [y|n] :

y

XCP update is started (XCP version=1082:last version=1080)

OpenBoot PROM update is started (OpenBoot PROM version=02090000)

OpenBoot PROM update has been completed (OpenBoot PROM version=02090000)

XSCF update is started (XSCFU=0,bank=1,XCP version=1082:last version=1080)

XSCF download is started (XSCFU=0,bank=1,XCP version=1082:last

version=1080, Firmware Element ID=00:version=01080001:last 
version=01080000)

XSCF download has been completed (XSCFU=0,bank=1,XCP version=1082:last

version=1080, Firmware Element ID=00:version=01080001:last 
version=01080000)

:

Summary of Contents for SPARC Enterprise M3000

















































































































































































































































































































































































































































































































































































Reviews:

No comments