manualshive.com logo in svg

Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 372 / 560

Share
Download
Fujitsu SPARC Enterprise M3000 Xscf Reference Manual Download Page 372

showcodusage(8)

348

SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised July 2010

EXTENDED

DESCRIPTION

The 

showcodusage

 

-p resource

 command displays the following COD usage 

information for the system:

The 

showcodusage

 

-p domain

 command displays the following COD usage 

information for each domain:

Resource

Identifies the type of COD resources available (processors).

In Use

Specifies the number of COD CPUs currently used in the 
system. 

Installed

Specifies the number of COD CPUs installed in the system.

COD Permitted

Specifies the number of COD permits installed.

Status

Specifies one of the following COD attributes:

OK

Indicates that there are sufficient permits 
for the COD CPUs in use. Also displays 
the number of remaining COD resources 
available and the number of any instant 
access CPUs (headroom) available.

HEADROOM

The number of instant access COD CPUs 
in use.

Violation

Indicates a COD permit violation exists. 
Displays the number of COD CPUs in use 
that exceeds the number of COD permits 
available. This situation can occur when 
you force the deletion of a COD key from 
the COD Hardware Activation database, 
but the COD CPU associated with the key 
is still in use.

Domain/Resource

Identifies COD resource (processor) for each domain. An 
Unused processor is a COD CPU that has not yet been 
assigned to a domain.

In Use

Specifies the number of COD CPUs currently used in the 
domain.

Summary of Contents for SPARC Enterprise M3000

















































































































































































































































































































































































































































































































































































Reviews:

No comments