Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 314 / 560

setsnmpvacm(8)
290 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007
OPERANDS
The following operands are supported:
EXAMPLES
EXAMPLE 1
Create a Group
createaccess
Sets access to a MIB view for the specified group.
-r
read_viewname Specifies an SNMP Agent view.
groupname Specifies a valid group name.
creategroup
Sets up a group for the specified user for view access.
-u
username Specifies a valid user name.
groupname Specifies a valid group name.
createview
Sets up a view of the SNMP Agent exported MIB information.
View access is limited to read-only for this Agent. The view is
identified through a MIB OID subtree and can be limited to
specific portions of that subtree using the OID Mask.
-e
Specifies an excluded view. The default is an
included view.
-m
OID_Mask Specifies a valid OID subtree mask. By
default, the mask is
ff
(entire subtree).
-s
OID_subtree Specifies a MIB OID subtree. Values start at
.1
for the entire MIB tree.
viewname Specifies a valid view name.
deleteaccess
Removes access entry.
groupname Specifies a valid group name.
deletegroup
Removes a group from use.
-u
username Specifies a valid user name.
groupname Specifies a valid group name.
deleteview
Removes this view from use.
-s
OID_subtree Specifies a MIB OID subtree. Values start at
.1
for the entire MIB tree.
viewname Specifies a valid view name.
XSCF>
setsnmpvacm creategroup -u jsmith admin