Fujitsu SPARC Enterprise M3000 Xscf Reference Manual Download Page 186

Page: 186 / 560

setarchiving(8)

162

SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009

OPERANDS

The following operands are supported:

EXAMPLES

EXAMPLE 1

Setting the Archiving Target and Password

EXAMPLE 2

Setting the Public Host Key

EXAMPLE 3

Setting the Space Limits for Archives

EXAMPLE 4

Enabling Archiving

EXIT STATUS

The following exit values are returned:

SEE ALSO

showarchiving

(8)

enable

Activates the log archiving feature. Cannot be used with any
options.

disable

De-activates the log archiving feature. Cannot be used with any
options.

XSCF>

setarchiving -t [email protected]:/home/jsmith/

logs -r

Enter ssh password for [email protected]:

[]

XSCF>

setarchiving -k download

Downloading public host key from somehost.company.com....

Fingerprint: c3:75:f9:97:7d:dc:le:le:62:06:c1:6f:87:bc:e8:0d

Accept this public key (yes|no):

yes

XSCF>

setarchiving -l 10000,10000

XSCF>

setarchiving enable

Testing the archiving configuration...

Logs will be archived to somehost.company.com.

Successful completion. Configuration updated.

An error occurred.

Summary of Contents for SPARC Enterprise M3000

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SPARC Enterprise M3000

Reviews:

Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 186 / 560

Search results

Summary of Contents for SPARC Enterprise M3000

Reviews: