manualshive.com logo in svg

Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 417 / 560

Share
Download
Fujitsu SPARC Enterprise M3000 Xscf Reference Manual Download Page 417

showfru(8)

System Administration

393

NAME

showfru - display the hardware settings of specified device 

SYNOPSIS

showfru

 device location

showfru

 

-a

 device

showfru

 

-h

DESCRIPTION

The 

showfru

(8) command displays the hardware settings of specified device by the 

setupfru

(8) command.

The command can display the settings of the specified device or of all devices. Only 
the physical system board (PSB) can be specified as a device.

The following settings are displayed:

Privileges

You must have 

platadm

 or 

fieldeng

 privileges to run this command.

Refer to 

setprivileges

(8) for more information.

OPTIONS

The following options are supported.

Device

Specified device name. Only 

sb

 is displayed.

Location

Device location. If the 

device

 is "

sb

", the indicated location is an 

integer ranging from 00 to 15.

XSB Mode

XSB mode set for the PSB. One of the following values is 
displayed:

Uni

Uni-XSB

Quad

Quad-XSB

Memory Mirror 

Mode

Memory mirror mode set for the PSB. One of the following 
values is displayed:

yes

Memory mirror mode

no

Memory no-mirror mode

-a

Displays the settings of all devices.

-h

Displays usage statement. When used with other options or 
operands, an error occurs.

Summary of Contents for SPARC Enterprise M3000

















































































































































































































































































































































































































































































































































































Reviews:

No comments