Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 54 / 560

cfgdevice(8)
30 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
Privileges You must have
platadm
or
fieldeng
privileges to run this command.
Refer to
setprivileges
(8) for more information.
OPTIONS The following options are supported:
EXTENDED
DESCRIPTION
■
When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "
y
" to execute the command or "
n
"
to cancel the command.
SAS-status
Connection status between I/O unit and the system.
■
enable/disable
: Connection setting between I/O unit and
the system. When starting a domain with no I/O unit, the
"
disable
" may be displayed.
enable
: Yes
disable
: No
■ up/down
: Logical connection between I/O unit and the
system.
up
: Connected.
down
: Not connected.
-c attach
Connects the CD-RW/DVD-RW drive unit and the tape drive
unit to the specified port.
-c detach
Disconnects the CD-RW/DVD-RW drive unit and the tape
drive unit from the specified port.
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-l
Displays the current status of the CD-RW/DVD-RW drive
unit and the tape drive unit currently set up.
-M
Displays text by page. This option provides a function that is
the same as that of the
more
command.
-n
Automatically answers "
n
" (no) to all prompts.
-p
port_no Specifies the number of the port, in the specified domain, to
which the CD-RW/DVD-RW drive unit and the tape drive
unit is to be connected.
port_no can be specified in the ’ IOU
number - PCI slot number ’ format. The
-p
option cannot be
omitted.
-q
Suppresses all messages to stdout, including prompts.
-y
Automatically answers "
y
" (yes) to all prompts.