Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 388 / 560

showdcl(8)
364 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
OPTIONS
The following options are supported:.
EXTENDED
DESCRIPTION
■
An XSB for which the floating board priority is set to a low value is difficult to
use as a floating board. Accordingly, it is difficult for the system board to affect
the domain Solaris OS.
■
The
setdcl
(8) command sets the DCL.
EXAMPLES
EXAMPLE 1
Displays detailed information on the DCL that is set for domain ID 0
EXAMPLE 2
Displays details in the DCL that is set for domain ID 0.
-a
Displays information that is set for all domains.
-d
domain_id Specifies the ID of the domain for which information is to be
displayed. The
domain_id can be 0–23 depending on the system
configuration.
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-l
lsb Specifies the LSB number whose information is to be displayed.
Multiple
-l
options can be specified by delimiting them with
spaces. Specify an lsb value by using an integer ranging from 0 to
15. If lsb is omitted, all the LSBs in the domain are targets.
-v
Also displays information on
Cfg-policy
,
No-Mem
,
No-IO
, and
Float
in the DCL.
XSCF>
showdcl -d 0
DID LSB XSB Status
00 Running
00 00-0
04 01-0
08 02-0
12 03-0
XSCF>
showdcl -v -d 0
DID LSB XSB Status No-Mem No-IO Float Cfg-policy
00 Running FRU
00 00-0 False False False
01 -
02 -