Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 34 / 560

addboard(8)
10 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
OPERANDS The following operand is supported:
EXTENDED
DESCRIPTION
■
You can execute the
addboard
(8) command on a domain that is not running.
When the domain is running, the
addboard
(8) command with "
-c configure
"
will succeed only if the following Solaris Service Management Facility (SMF)
services are active on that domain:
■
Domain SP Communication Protocol (dscp)
■
Domain Configuration Server (dcs)
■
Sun Cryptographic Key Management Daemon (sckmd)
-d
domain_id Specifies the ID of the domain in which an XSB is to be
configured or to which it is to be assigned.
domain_id can be 0–23
depending on the system configuration.
-f
Forcibly incorporates into a domain an XSB.
Caution – If the
-f
option is used to forcibly add an XSB to a
domain, all the added hardware resources may not work
normally. For this reason, use of the
-f
option is not
recommended in normal operation. If the
-f
option must be
specified, verify the status of every added XSB and device.
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-n
Automatically answers "
n
" (no) to all prompts.
-q
Suppresses all messages to stdout, including prompts.
-v
Displays a detailed message. If this option is specified with the
-q
option, the
-v
option is ignored.
-y
Automatically answers "
y
" (yes) to all prompts.
xsb Specifies the XSB number to be configured or assigned. Multiple
xsb operands are permitted, separated by spaces. The following
xsb form is accepted:
x – y
where:
x An integer from
00
–
15
.
y An integer from
0
–
3
.