Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 27 / 560

Intro(8)
Intro 3
setarchiving
configure the log archiving functionality
setaudit
manage the system auditing functionality
setautologout
set the session timeout time of the XSCF shell
setcod
set up the Capacity on Demand (COD) resources used for
domains
setdate
set the date and time of XSCF
setdcl
set a domain component list (DCL)
setdomainmode
set a domain mode
setdomparam
forcibly rewrite OpenBoot PROM environment variables
setdscp
set the IP address assignments for the Domain to Service
Processor Communications Protocol (DSCP)
setdualpowerfeed
set dual power feed mode
setemailreport
set up the email report configuration data
sethostname
set a host name and domain name for an XSCF unit
sethttps
start or stop the HTTPS service, which is used in the XSCF
network. This command also performs authentication-
related settings
setldap
configure the Service Processor as a Lightweight Directory
Access Protocol (LDAP) client
setldapssl
configure LDAP/SSL
setlocale
set the default locale of the XSCF
setlocator
control the blinking of the CHECK LED on the operator
panel
setloginlockout
enable or disable login lockout feature
setlookup
enable or disable the use of the Lightweight Directory
Access Protocol (LDAP) server for authentication and
privilege lookup
setnameserver
set the domain name system (DNS) servers and the DNS
search paths used in the XSCF network
setnetwork
set or remove the network interface that used in XSCF
setntp
set the NTP servers used on the XSCF network, the stratum
value, the preferred server and the clock address of the
local clock of XSCF