manualshive.com logo in svg

Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 181 / 560

Share
Download
Fujitsu SPARC Enterprise M3000 Xscf Reference Manual Download Page 181

setaltitude(8)

System Administration

157

NAME

setaltitude - set the altitude of the system or whether or not the air filter installed

SYNOPSIS

setaltitude

 

-s

  key=value

setaltitude

 

-h

DESCRIPTION

The 

setaltitude

(8) command sets the altitude of the system or whether or not 

the air filter installed.

Whether or not the air filter installed can be specified on the M4000/M5000 servers 
only.

Privileges

You must have 

platadm

 or 

fieldeng

 privileges to run this command.

Refer to 

setprivileges

(8) for more information.

OPTIONS

The following options are supported:

EXTENDED

DESCRIPTION

■

If the altitude of the system is set, any abnormality in the intake air temperature 
can be detected quickly. If the altitude of the system is unknown, set a high 
value. However, even if no altitude is set for the system, any abnormality in 
temperatures such as the CPU temperature can still be detected, so the system 
would not be damaged by a fatal error.

-h

Displays usage statement. When used with other options or 
operands, an error occurs.

-s

 

key

=

value

The item to be set is specified by 

key

. The following value can be 

specified:

altitude

Sets the altitude of the system.

filter

Sets whether or not to install the air filter. 
You can specify this on the M4000/M5000 
servers only.

When you specified 

altitude

 as 

key

, specify the altitude of the 

system in 

value

 in units of meters (

m

). An integer equal to or 

greater than 0 can be specified, and the specified value is 
rounded up to the nearest hundred meters. The default value is 0 
meters. 

When you specified 

filter

 as 

key

, either of the following can be 

specified for value: 

installed

Air filter is installed.

uninstalled

Air filter is not installed.

Summary of Contents for SPARC Enterprise M3000

















































































































































































































































































































































































































































































































































































Reviews:

No comments